Utilization
Soiling
-
Organic / inorganic contamination (grease, oil, protein, starch etc.) - Normal soiling (dust, beverage stains, insect stains, etc.)
Material compatibility
- Cement and concrete screed
- Clinker and terracotta
- Asphalt flooring
- PVC safety flooring
- Synthetic resin filler coverings
- Concrete stone and terrazzo | calcareous
- Cast stone and terrazzo | bitumen-bound
- Quartz vinyl
- Magnesite screed
- Ceramic tiles
- Washed concrete
Product Information
- Eco-certified
- Very good dirt, grease and oil-removing power
- Material-compatible
- Quick separation according to ÖNORM B 5105
- Meets the requirements of the vehicle industry
- Meets the requirements within the framework of an HACCP concept
- Suitable for application in cleaning machines, single-disc machines and high-pressure cleaning equipment
Area of application
- Food industry and industrial sector
- water-resistant materials, surfaces, floors and production machinery
Application and dosage
- Dosing aids are available on request.
- Correct dosage saves costs and protects the environment.
- Always use cold water.
-
50 - 200 Millilitre / 10 liter Water
-
1:5 - 1:10 with water
-
50 - 100 Millilitre / 10 liter Water
-
20 - 100 Millilitre / 10 liter Water
-
50 - 100 Millilitre / 10 liter Water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Surfaces or objects that come into direct contact with food must be cleaned of cleaning residues by careful rinsing with water.
- *Dosage according to EU ecolabel criteria: Light soiling: 50 ml / 10 l; normal soiling: 100 ml / 10 l.
- When used in the machine, the tanks should be cleaned and rinsed regularly.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Tips and tricks
low / weak cleaning performance
choose an alkaline intensive cleaner, e.g. Perfekt G 440, Indumaster® Intensive IR 44, Indumaster® Strong IR 45
Stripes and/or film on the surface, too much foam
Adjust product dosage; rinse thoroughly with clean water
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
Environmental Information
Proportion of easily degradable ingredients
98.1 %
Phosphorus content
0.3 mg/g
Palm oil-based raw materials - RSPO-certified share
100 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- P950-0010: 1 x 10 l canister
- P950-0200: 1 x 200 l drum
- P950-0750: 1 x 750 l IBC container
Classification according to CLP
Danger marking
Warning
Hazard information
- H290: May be corrosive to metals.
- H319: Causes serious eye irritation.
Safety instructions
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice/attention.
Download area
- Operating instructions
- EU Ecolabel
- Austrian Ecolabel
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information