Utilization
Soiling
-
Organic / inorganic contamination (grease, oil, protein, starch etc.) - Bad odours
- Normal soiling (dust, beverage stains, insect stains, etc.)
Material compatibility
- Marble and Jurassic
- Laminate | Click
- Polyurethane sports halls | uncoated
- Linoleum | PU seal
- PVC | PU seal
- Polyolefin
- Conductive floor coverings
- Quartz vinyl
- Magnesite screed
- Ceramic tiles
- Wooden floor | sealed
- Cement and concrete screed
- Clinker and terracotta
- PVC composite decking
- Synthetic resin filler coverings
- PVC safety flooring
- Design vinyl
- Cork flooring | sealed
- PVC | heterogeneous, multilayer
- PVC sports / multi-purpose halls | coated
- PVC | homogeneous
- Asphalt flooring
- Washed concrete
Product Information
- Powerful cleaning effect
- Can be used for intensive cleaning in final construction cleaning
- Deodorising fresh fragrance with active odour blocker
- High dirt holding capacity
- Streak-free cleaning
- Very good material compatibility
- Tested according to FMPA DIN 18032/2 for sports floors
Area of application
- water-resistant floor coverings and hard-to-wet floors
- particularly suitable for PUR-modified resilient floor coverings made of linoleum and PVC, vinyl and design floor coverings as click and adhesive flooring as well as sealed parquet flooring
- can also be used on PE and PP coverings, as well as synthetic resin screeds, epoxy with and without polyurethane
- can also be used on hard-to-wet natural and artificial stone surfaces
Application and dosage
- Always use cold water.
-
50 - 100 Millilitre / 10 liter Water
-
20 - 50 Millilitre / 10 liter Water
-
100 - 150 Millilitre / 10 liter Water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Protect from frost.
- With direct and indirect light irradiation, there may be a colour change in the product, which, however, does not affect the product quality.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
Tips and tricks
Stripes and/or film on the surface, too much foam
Adjust product dosage
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
Environmental Information
Proportion of easily degradable ingredients
99.6 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
88 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- S766-0001RA: 1 x 1 l bottle
- S766-0010RA: 1 x 10 l canister
Classification according to CLP
Danger marking
Warning
Hazard information
- H319: Causes serious eye irritation.
Safety instructions
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice/attention.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
