Utilization
Soiling
-
Organic / inorganic contamination (grease, oil, protein, starch etc.)
Material compatibility
- Stainless steel
- Plastics
- Crockery, glasses and cutlery | manual
- Aluminium dishes
- Porcelain dishes
Product Information
- Intensive cleaning performance
- Removes stubborn food residues, fat, starch and protein residues as well as incrustations quickly and powerfully
- Glass and material-compatible
- No odor, perfume and chlorine free
- Optimal washing results in conjunction with Buzil rinse aids
- Highly concentrated, therefore low dosage and high economic efficiency
Area of application
- for use in commercial single-tank and multi-tank glass and dishwashing machines
- particularly suitable for soft water areas
- suitable for all types of dishes made of glass, porcelain, stainless steel, aluminum and silver as well as cutlery and equipment
- Pre-test anodized aluminium
Application and dosage
- Dosing is carried out via automatic dosing devices depending on the amount of dirt and the water hardness.
-
1.5 - 5 Millilitre / 1 liter Water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- The water hardness can be manually determined by means of water hardness test strips or retrieved from the local water supplier.
- Before changing the product, the containers, pipes and dosing devices must be rinsed with fresh water.
- After the dishwasher has finished operating, all screens should be cleaned.
- To dry the interior and protect against corrosion, leave the machine slightly open.
- Guideline values for conductivity measurement: Concentration in ml/L - Conductivity in mS/cm with osmosis water (0 °dH): 0.0 ml/L - 0.002 mS/cm; 1.5 ml/L - 1.242 mS/cm, 2.0 ml/L - 1.726 mS/cm, 2.5 ml/L - 2.070 mS/cm, 3.0 ml/L - 2.420 mS/cm, 3.5 ml/L - 2.810 mS/cm, 4.0 ml/L - 3.170 mS/cm, 4.5 ml/L - 3.460 mS/cm, 5.0 ml/L - 3.830 mS/cm. Please note that these are laboratory values that depend on various factors such as the respective manufacturer, the machine and the water hardness. Therefore, deviations can occur.
- Protect from frost.
- Avoid direct sunlight.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Environmental Information
Proportion of easily degradable ingredients
100 %
Phosphorus content
41.3 mg/g
Palm oil-based raw materials - RSPO-certified share
contain no palm oil-based raw materials
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- DW15-0012RA: 1 x 12 kg canister
Classification according to CLP
Danger marking
Danger
Hazard information
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
Safety instructions
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information