Product Information
- Alcoholic disinfectant based on ethanol
- Short exposure times
- Effective against bacteria, yeasts and enveloped viruses and adeno-, noro- and rotaviruses
- Spectrum of activity: bactericidal, yeasticidal, limited virucidal, limited virucidal PLUS
- Dries quickly
- VAH-listed
- Perfume and dye-free
- Residue-free, therefore no formation of deposits after application
- No wiping or rinsing of the surface necessary
- Meets the requirements within the framework of an HACCP concept
Area of application
- for use in all areas such as public facilities, food industry, food processing industry, kitchen area and healthcare
- for hygienic surface disinfection of all alcohol- and water-resistant surfaces and materials
Application and dosage
- Apply the ready-to-use product to the surface by spraying.
- Ensure that surfaces are fully wetted and observe the minimum contact time.
- The product should be used at room temperature.
- Recommended use for surface disinfection (spectrum of effects/exposure times):
- bactericidal, yeasticidal - VAH / EN 13697: high load, without mechanics 5 min.
- tuberculocide (M. terrae) - EN 14348: low exposure 30 s.
- mycobactericidal (M.avium, M. terrae) - EN 14348: low exposure 1 min.
- limited virucidal - EN 14476: low exposure 1 min.
- limited virucidal PLUS - EN 14476: low exposure 3 min.
-
undiluted
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Ingredients: 100 g contains: 45 g ethanol.
- Use biocides safely. Always read the labelling and the product information before use.
- Not on alcohol-sensitive materials such as acrylic glass (PMMA).
- Please note the expiry date on the original packaging.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Tips and tricks
Stripes and/or film on the surface
Rinse thoroughly with clean water
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
low / weak cleaning performance
choose a disinfectant cleaner, e.g. Budenat® Intense D 443, Budenat® Alkasept D 445
no cleaning performance
choose a disinfectant cleaner, e.g. Budenat® Intense D 443, Budenat® Alkasept D 445
Environmental Information
Proportion of easily degradable ingredients
100 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
contain no palm oil-based raw materials
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- D112-0600: 1 x 600 ml bottle
Classification according to CLP
Danger marking
Warning
Hazard information
- H226: Flammable liquid and vapour.
Safety instructions
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P233: Keep container tightly closed.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501: Dispose of contents/containers in accordance with local and national regulations.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
- Association for Applied Hygiene (VAH)