Corridor®+ Protect Glossy
Floor

Corridor®+ Protect Glossy

P 938
Ecological dispersion, glossy

Material compatibility

  • Rubber | smooth
  • Linoleum | uncoated
  • Linoleum | coated
  • Linoleum | PU seal
  • PVC | homogeneous

Product Information

  • Eco-certified, awarded the Austrian Ecolabel
  • Durable, high-gloss polymer dispersion
  • Resistant environmentally friendly formulation
  • Very good filling power and good flow properties
  • Forms a dirt-repellent and abrasion-resistant care film
  • Facilitates maintenance cleaning through higher surface performance
  • Free of metal salt
  • Optimal alcohol and disinfectant resistance
  • Slip-resistant according to DIN EN 16165
  • Can be easily polished with the high-speed machine
  • Economical, as it is suitable for dry care film restoration and for cleaning (spray method)
  • Easily removable with Corridor®+ Multi Stripper P 937

Area of application

  • ideal for use in healthcare facilities such as hospitals, nursing homes and doctor's offices as well as other areas where disinfectants are used
  • for all water-resistant, coatable (including residual moisture) and thoroughly cleaned floor coverings such as PVC and linoleum
  • coatable PUR-modified coverings
  • also suitable for absorbent natural and artificial stone floors

Application and dosage

  • Correct dosage saves costs and protects the environment.
  • Apply neat in 2 - 3 coats evenly on a thoroughly cleaned, neutralised and dry floor covering.
  • Apply undiluted a thin layer in 2 – 3 layers.
  • Each layer must dry out on its own.
  • undiluted

  • 1:2 - with water

  • undiluted

  • Apply fresh application solutions and consume them within 24 hours at the latest.

Note

  • Protect from frost.
  • Avoid direct sunlight.
  • Before processing, turn off heat sources (underfloor heating, heating, hot supply air).
  • A single, temporary exposure on the surface without mechanics, to commercially available disinfectants (max. 15 Minutes of continuous stress) is tested and does not cause any damage to the coating surface.
  • Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.

Tips and tricks

insufficient filling power / shine
Coating too porous, use pore filler or apply another layer
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
grey / matt appearance of the surface due to hard water
clean periodically with O Tens Azid G 501
Foam formation with "craters" as a result after drying
Coating too rough, spread more slowly when applying

Environmental Information

Proportion of easily degradable ingredients

12.6 %

Phosphorus content

1.7 mg/g

Palm oil-based raw materials - RSPO-certified share

100 %

The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.

Sales units

  • P938-0005: 1 x 5 l canister

Download area

  • Operating instructions
  • Austrian Ecolabel
  • Safety Data Sheets
  • Technical Data Sheets
  • Environmental Information