Utilization
Soiling
-
Care product residues (coatings, polymers etc.)
Material compatibility
- Belgian granite
- Shell limestone
- Sandstone
- Ceramic tiles
- Basalt
- Granite
- Slate
- Gneiss
- Magnesite screed
- Polyolefin
- Gabbro
- Travertine
- Rubber | textured
- Rubber | smooth
- Conductive floor coverings
- Linoleum | uncoated
- Quartzite
- Gabbro | Nero Assoluto
- Linoleum | coated
- Marble and Jurassic
- Linoleum | PU seal
- Enomer
- Concrete stone and terrazzo | non-calcareous
- Rubber sports / multi-purpose halls | uncoated
- Concrete stone and terrazzo | calcareous
- PVC | PU seal
- PVC composite decking
- Green sandstone | Anröchter stone
- Design vinyl
- PVC | heterogeneous, multilayer
- Solnhofer plates
- PVC sports / multi-purpose halls | coated
- PVC | homogeneous
- Linoleum sports / multi-purpose halls | uncoated
- Linoleum sports / multi-purpose halls | coated
- Clinker and terracotta
Product Information
- Eco-certified
- Developed for the removal of heavy deposits/polymer coatings
- Very good material compatibility
- Environmentally friendly formula with good dirt and film-removing action
- Short exposure times
- Easy to remove from the surface
- Excellent for subsequent use with Corridor®+ Protect Glossy P 938
Area of application
- for water-resistant, alkali-sensitive elastic floor coverings such as linoleum, elastomer coverings and PVC
- can be used on artificial and natural stone surfaces
Application and dosage
- Always use cold water.
- Depending on age, number of layers and type of care.
- Spread cleaning solution on the floor, let it briefly take effect, clean thoroughly, vacuum the loosened dirt, remove residues.
- Correct dosage saves costs and protects the environment.
-
1 - 2.5 liter / 10 liter Water
-
1 - 2.5 liter / 10 liter Water
-
500 Millilitre / 10 liter Water
-
500 Millilitre / 10 liter Water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Check for material and colour compatibility.
- Not suitable for asphalt or bitumen coverings.
- Before processing, turn off heat sources (underfloor heating, heating, hot supply air).
- When used in the machine, the tanks should be cleaned and rinsed regularly.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Tips and tricks
low / weak cleaning performance
Adjust product dosage
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
still weak / poor dissolving effect of the coating
choose a high-performance basic cleaner, e.g. Corridor® Power Stripper S 708
Surface damage (discoloration, swelling of material, etc.)
check the chemical and water compatibility or the mechanics used (pad, brush)
Environmental Information
Proportion of easily degradable ingredients
78.9 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
100 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- P937-0005: 1 x 5 l canister
Classification according to CLP
Danger marking
Warning
Hazard information
- H319: Causes serious eye irritation.
Safety instructions
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice/attention.
Download area
- Operating instructions
- Austrian Ecolabel
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
