Corridor® Basic
Floor

Corridor® Basic

S 720
Pore filler and primer

Material compatibility

  • Sandstone
  • Cement and concrete screed
  • Magnesite screed
  • Linoleum | uncoated
  • Linoleum sports / multi-purpose halls | uncoated
  • Asphalt flooring
  • Clinker and terracotta
  • Washed concrete

Product Information

  • Prolongs value retention
  • Penetrates deep into the pores
  • Protects against dirt build-up and is permeable to water vapour
  • Resistant to alcohol and disinfectants
  • Chemically insoluble
  • Dust-binding
  • Deepens the colours
  • Makes the daily routine clean easier
  • Resistant to mechanical influences

Area of application

  • for open-pored and absorbent floor coverings, e.g. concrete, cement and magnesite screed
  • particularly suitable for old and damaged floor coverings, as well as linoleum coverings that have been thoroughly cleaned several times

Application and dosage

  • Always use cold water.
  • Apply undiluted in 1 - 3 layers (linoleum), for absorbent coverings such as concrete, dilute the first layer of screed 1:1 with water.
  • 1:1 - with water - PUR

  • Apply fresh application solutions and consume them within 24 hours at the latest.

Note

  • Protect from frost.
  • Before processing, turn off heat sources (underfloor heating, heating, hot supply air).
  • Avoid direct sunlight.
  • Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
  • Commercial use only

Tips and tricks

insufficient filling power
Coating too porous, apply another layer
Dusting under stress
Allow the surface to dry completely before application; clean thoroughly again
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
grey / matt appearance of the surface due to hard water
clean periodically with O Tens Azid G 501
Foam formation with "craters" as a result after drying
Coating too rough, spread more slowly when applying

Environmental Information

Proportion of easily degradable ingredients

23.2 %

Phosphorus content

0.7 mg/g

Palm oil-based raw materials - RSPO-certified share

contain no palm oil-based raw materials

The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.

Sales units

  • S720-0010RA: 1 x 10 l canister

Classification according to CLP

Danger marking

Warning

  • Reizend, Gesundheitsschädlich

Hazard information
  • H319: Causes serious eye irritation.
  • EUH208: Contains 2-Methylisothiazol-3(2H)-one, Methylchloroisothiazolinone and 1,2-Benzisothiazol-3(2H)-one. May produce an allergic reaction.

Safety instructions
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P337+P313: If eye irritation persists: Get medical advice/attention.

Download area

  • Operating instructions
  • Safety Data Sheets
  • Technical Data Sheets
  • Environmental Information