Utilization
Soiling
-
Mineral soiling (lime, cement residue, urine scale, etc.)
Material compatibility
- Chrome
- Stainless steel
- Ceramic tiles
- Sanitary porcelain
Product Information
- Powerful cleaning effect
- Easily removes lime, dirt and soap residues
- Streak-free gloss without subsequent drying due to beading effect
- Leaves a pleasant ambience in the room
- Does not attack chrome and stainless steel
- RE-listed
- RK-listed
- Suitable for application in the foam gun and the single-disc machine
Area of application
- for the entire wet room and sanitary area
- for all acid-resistant surfaces and materials such as wall and floor tiles, washbasins, stainless steel, chrome fittings, aluminium surfaces, bathtubs, toilets and urinals
- can be used on tiles, washbasins, toilets, sanitary porcelain, chrome and stainless steel surfaces, wall and floor tiles
Application and dosage
- Always use cold water.
- Rinse with clean water.
-
undiluted
-
20 - 50 Millilitre / 10 liter Water
-
20 - 50 Millilitre / 10 liter Water
-
200 - 1000 Millilitre / 10 liter Water
-
50 Millilitre / 600 Millilitre Water
-
1:5 - 1:10 with water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Do not apply to lime-bound natural stones such as marble, Solnhofer slabs, travertine, shell limestone.
- Do not apply to aluminium, painted surfaces and acrylic glass.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Tips and tricks
low / weak cleaning performance
choose a basic sanitary cleaner, e.g. Bucalex® G 460, Buz® Contracalc G 461
no cleaning performance
choose a problem solver, e.g. Buz® Mark Ex G 559, Clean Up G 555, Buz® Point G 502, Buz® Metasoft G 507
Stripes and/or film on the surface
Rinse thoroughly with clean water
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
Environmental Information
Proportion of easily degradable ingredients
97.8 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
100 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- T464-0001RA: 1 x 1 l bottle
- T464-0010RA: 1 x 10 l canister
- T464-0005RA: 1 x 5 l canister
- T464-0950RA: 1 x 950 l IBC container
- T464-0200RA: 1 x 200 l drum
Classification according to CLP
Danger marking
Danger
Hazard information
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
Safety instructions
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
