Utilization
Soiling
-
Special soiling (graffiti, chewing gum, glue, felt-tip pen, stamping ink, etc.) - Organic / inorganic contamination (grease, oil, protein, starch etc.)
- Normal soiling (dust, beverage stains, insect stains, etc.)
Material compatibility
- Cement and concrete screed
- Wood surface | sealed
- Exterior glazing, window glass
- Carpet | Ball yarn
- Carpet | Needlefelt
- Carpet | Loop fabric
- Interior glazing, mirrors
- Aluminium | indoor
- Resopal
- Wood surface | oiled/waxed
- Laminate | Click
- Carpet | Velour
- Aluminium | powder-coated
- Plastics
- Stainless steel
Product Information
- Problem solver with very high effectiveness and dirt dissolving power
- Removes water-insoluble soiling such as rubber abrasion, chewing gum, paint, oil and grease, tar and bitumen, resin and lubricating oil stains, shoe polish, copy and stamp ink, ballpoint pens and felt-tip pens, ink and wax stains, etc.
- Effortlessly removes even stubborn adhesive residue from stickers and labels
- Leaves no residue
- Stain-removing power based on natural raw materials
- Economical consumption due to high area coverage with spray attachment
- Leaves a characteristic fruity orange scent
Area of application
- for stain removal on solvent-resistant, colourfast surfaces, carpets and upholstered furniture
Application and dosage
- Spray the stain on solvent- and colour-resistant textile coverings, let it briefly take effect, blot it away from the outside to the inside with a clean rag, remove it with a spatula if necessary.
-
undiluted
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Do not use on polystyrene.
- The product must be used up within 6 months after first use, otherwise technical problems cannot be ruled out.
- Observe the manufacturer's cleaning instructions.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
Tips and tricks
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
Environmental Information
Proportion of easily degradable ingredients
100 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
contain no palm oil-based raw materials
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- G502-0200R7: 1 x 200 ml spray can
Classification according to CLP
Danger marking
Danger
Hazard information
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H411: Toxic to aquatic life with long lasting effects.
Safety instructions
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P302+P352: IF ON SKIN: Wash with plenty of soap and water.
- P410: Protect from sunlight.
- P412: Do not expose to temperatures exceeding 50 °C/122 °F.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
