Usage
Pollution
-
Mineral soiling (lime, cement residue, urine scale, etc.)
Material tolerance
- Chrome
- Ceramic tiles
- Stainless steel
- Porcelain stoneware tiles
- Safety tiles
- Sanitary porcelain
- Clinker and terracotta
Product Information
- Powerful and spontaneous cleaning performance thanks to an effective combination of acids
- Dissolves stubborn deposits of typical sanitary contamination such as lime, scale, cement residue, rust, water and urine scale, skin oils, cosmetic residues, etc.
- Prevents rapid re-soiling thanks to the lime and dirt blocking effect
- Leaves high-gloss, streak-free surfaces without further drying
- Material-compatible
- Leaves a long-lasting and pleasant fresh scent
- Also ideal for post-construction cleaning
- Can also be easily foamed and processed with a foam cannon
Areas of application
- in the entire sanitary and wet room area
- for all acid-resistant surfaces and materials such as wall and floor tiles, washbasins, stainless steel, chrome fittings, aluminium surfaces, bathtubs, toilets and urinals
Application and dosage
- Always use cold water.
- Be sure to pre-wet surfaces and rinse with clean water!
-
undiluted
-
200 Millilitre / 10 liter Water
-
20 - 50 Millilitre / 10 liter Water
-
200 - 1000 Millilitre / 10 liter Water
-
50 Millilitre / 600 Millilitre Water
-
1:5 - 1:10 with water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Hints
- Do not use on acid-sensitive materials, aluminum, painted surfaces, acrylic glass (PMMA) and lime-bound natural stones such as marble or travertine.
- Do not use on damaged surfaces.
- Do not mix with other cleaning agent concentrates or cleaning products.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
Environmental information
Painting of easily degradable ingredients
99 %
Phosphorus
0.2 mg/g
Palm oil -based raw materials - proportion of RSPO certified
100 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- BE25-0001: 600 x 1 l bottle
- BE25-0010: 60 x 10 l canister
Classification according to CLP
Danger marking
Danger
Hazard information
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
Safety instructions
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information