Utilization
Soiling
-
Organic / inorganic contamination (grease, oil, protein, starch etc.)
Material compatibility
- Cement and concrete screed
- PVC | PU seal
- Synthetic resin filler coverings
- Washed concrete
Product Information
- Fast-drying machine cleaner
- Good dirt-removing capacity
- Removes oil and grease-containing dirt
- With foam brake
- Removes rubber abrasion
- Quick separation according to ÖNORM B 5105
Area of application
- for use in the industrial and workshop sector
- alkali and water-resistant floor coverings such as PVC, stone (unpolished), epoxy resin, concrete screed, clinker, clay tiles
Application and dosage
- Always use cold water.
- Rinse with clean water.
-
100 - 500 Millilitre / 10 liter Water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Not suitable for alkali-sensitive floor coverings such as linoleum, rubber, open wood, cork, limestone such as marble and terrazzo.
- When used in the machine, the tanks should be cleaned and rinsed regularly.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Tips and tricks
Stripes and/or film on the surface, too much foam
Adjust product dosage
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
low / weak cleaning performance
choose an industrial cleaner, e.g. Indumaster® Strong IR 45, Indumaster® Offensive IR 47
Environmental Information
Proportion of easily degradable ingredients
97.8 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
77 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- IR14-0200RA: 1 x 200 l drum
- IR14-0010RA: 1 x 10 l canister
- IR14-0950RA: 1 x 950 l IBC container
Classification according to CLP
Danger marking
Danger
Hazard information
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
Safety instructions
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
