Utilization
Soiling
-
Normal soiling (dust, beverage stains, insect stains, etc.) - Organic / inorganic contamination (grease, oil, protein, starch etc.)
Material compatibility
- Rubber sports / multi-purpose halls | uncoated
- Acrylic and plexiglass
- Wood floor | oiled/waxed
- Asphalt flooring
- Aluminium | indoor
- PVC safety flooring
- Synthetic resin filler coverings
- Concrete stone and terrazzo | calcareous
- Cement and concrete screed
- Magnesite screed
- Aluminium | powder-coated
- Rubber | smooth
- Quartz vinyl
- Rubber | textured
- Washed concrete
Product Information
- Fast-acting power cleaner for manual and machine cleaning
- Good dirt-removing capacity
- Removes oil and grease-containing dirt
- Very good wetting capacity
- Very good material compatibility
- Quality-assured facade cleaning according to RAL-GZ 632
Area of application
- for use in the industrial and workshop sector
- all water-resistant surfaces and floor coverings
- Aluminium surfaces
- suitable for acrylic glass (PMMA)
- can be used for mechanical cleaning of escalators and moving walkways
- suitable for facade cleaning of organically coated uni-coloured metal facades, organically metallic-effect coated metal facades, stainless steel metal facades and plastic facades
Application and dosage
- Always use cold water.
- In case of heavy foaming in the dirty water tank, Buz® Defoam G 478 can be used.
-
50 - 200 Millilitre / 10 liter Water
-
50 - 100 Millilitre / 10 liter Water
-
50 - 100 Millilitre / 10 liter Water
-
1 - 2 liter / 10 liter Water
-
50 Millilitre / 600 Millilitre Water
-
50 - 100 Millilitre / 10 liter Water
-
1:1 - 1:2 with water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- When used in the machine, the tanks should be cleaned and rinsed regularly.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
Tips and tricks
Stripes and/or film on the surface, too much foam
Adjust product dosage
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
Environmental Information
Proportion of easily degradable ingredients
99.8 %
Phosphorus content
18.7 mg/g
Palm oil-based raw materials - RSPO-certified share
contain no palm oil-based raw materials
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- IR16-0001RA: 1 x 1 l bottle
- IR16-0010RA: 1 x 10 l canister
- IR16-0200RA: 1 x 200 l drum
- IR16-0950RA: 1 x 950 l IBC container
Classification according to CLP
Danger marking
Warning
Hazard information
- H319: Causes serious eye irritation.
- EUH208: Contains 1,2-Benzisothiazol-3(2H)-one, 2-Octyl-2H-isothiazol-3-one and Benzyl alcohol. May produce an allergic reaction.
Safety instructions
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice/attention.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
