Indumaster® Forte
Industry

Indumaster® Forte

IR 42
Solvent-based industrial and sports hall floor cleaner

Utilization

Soiling

  • Rubber abrasion and handball resins

Material compatibility

  • Cement and concrete screed
  • Laminate | Click
  • Magnesite screed
  • Rubber | textured
  • Quartz vinyl
  • Rubber | smooth
  • Conductive floor coverings
  • Linoleum | uncoated
  • Polyolefin
  • PVC | PU seal
  • Linoleum | coated
  • Enomer
  • Polyurethane sports halls | uncoated
  • Linoleum | PU seal
  • Concrete stone and terrazzo | non-calcareous
  • Rubber sports / multi-purpose halls | uncoated
  • Concrete stone and terrazzo | calcareous
  • PVC composite decking
  • PVC | heterogeneous, multilayer
  • PVC sports / multi-purpose halls | coated
  • PVC | homogeneous
  • Linoleum sports / multi-purpose halls | uncoated
  • Linoleum sports / multi-purpose halls | coated
  • Washed concrete

Product Information

  • Good dirt-removing capacity
  • Removes heel marks, rubber and tyre abrasion from forklifts, pallet trucks, handball resins etc
  • Can be used selectively
  • Low-foaming
  • Suitable for application in the cleaning machine and with the single-disc machine

Area of application

  • for use in the industrial and workshop sector
  • Storage and sports hall area, roller and sectional doors
  • for cleaning water-, solvent- and alkali-resistant surfaces and floor coverings such as PVC, natural and artificial stones, clinker, linoleum, rubber, etc.

Application and dosage

  • Always use cold water.
  • Rinse with clean water.
  • 100 Millilitre / 10 liter Water

  • 100 Millilitre / 10 liter Water

  • 1:2 - with water - PUR

  • 500 - 1000 Millilitre / 10 liter Water

  • Apply fresh application solutions and consume them within 24 hours at the latest.

Note

  • Only partially suitable for coated floor coverings. Please observe a maximum exposure time of 15 minutes.
  • When used in the machine, the tanks should be cleaned and rinsed regularly.
  • Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
  • Commercial use only

Tips and tricks

low / weak cleaning performance
Stripes and/or film on the surface
Rinse thoroughly with clean water
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
grey / matt appearance of the surface due to hard water
clean periodically with O Tens Azid G 501

Environmental Information

Proportion of easily degradable ingredients

97.9 %

Phosphorus content

0 mg/g

Palm oil-based raw materials - RSPO-certified share

100 %

The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.

Sales units

  • IR42-0010RA: 1 x 10 l canister

Classification according to CLP

Danger marking

Danger

  • Entzündlich
  • Ätzend, reizend
  • Krebserregend, Gesundheitsschädlich

Hazard information
  • H226: Flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways.
  • H317: May cause an allergic skin reaction.
  • H318: Causes serious eye damage.
  • H336: May cause drowsiness or dizziness.
  • H372: Causes damage to organs (central nervous system) through prolonged or repeated exposure.
  • H412: Harmful to aquatic life with long lasting effects.

Safety instructions
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P271: Use only outdoors or in a well-ventilated area.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
  • P302+P352: IF ON SKIN: Wash with plenty of soap and water.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P310: Immediately call a POISON CENTER/doctor.
  • P331: Do NOT induce vomiting.

Download area

  • Operating instructions
  • Safety Data Sheets
  • Technical Data Sheets
  • Environmental Information