Utilization
Soiling
-
Care product residues (coatings, polymers etc.)
Material compatibility
- Belgian granite
- Quartzite
- Ceramic tiles
- Basalt
- Granite
- Slate
- Gneiss
- Shell limestone
- Travertine
- Magnesite screed
- Gabbro
- Rubber | textured
- Rubber | smooth
- Conductive floor coverings
- Linoleum | uncoated
- Gabbro | Nero Assoluto
- Sandstone
- PVC | PU seal
- Concrete stone and terrazzo | calcareous
- PVC composite decking
- Linoleum | PU seal
- Enomer
- Concrete stone and terrazzo | non-calcareous
- Rubber sports / multi-purpose halls | uncoated
- Marble and Jurassic
- Green sandstone | Anröchter stone
- Design vinyl
- Polyolefin
- PVC | heterogeneous, multilayer
- Solnhofer plates
- PVC sports / multi-purpose halls | coated
- PVC | homogeneous
- Linoleum sports / multi-purpose halls | uncoated
- Linoleum sports / multi-purpose halls | coated
- Linoleum | coated
- Clinker and terracotta
Product Information
- Powerful all purpose stripper
- Excellent film and dirt-removing capacity
- Very good material compatibility
- Time saving due to short exposure time
- Easy to remove from the surface
- Even the hardest coatings are removed
Area of application
- water-resistant and alkali-sensitive floor coverings
Application and dosage
- Always use cold water.
- Spread cleaning solution on the floor, let it briefly take effect, clean thoroughly, vacuum the loosened dirt, remove residues.
-
1 - 2.5 liter / 10 liter Water
-
1 - 2.5 liter / 10 liter Water
-
500 Millilitre / 10 liter Water
-
500 Millilitre / 10 liter Water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Check for material and colour compatibility.
- Not suitable for asphalt or bitumen coverings.
- Before processing, turn off heat sources (underfloor heating, heating, hot supply air).
- When used in the machine, the tanks should be cleaned and rinsed regularly.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
Tips and tricks
low / weak cleaning performance
Adjust product dosage
still weak / poor dissolving effect of the coating
choose a high-performance basic cleaner, e.g. Corridor® Power Stripper S 708
Surface damage (discoloration, swelling of material, etc.)
check the chemical and water compatibility or the mechanics used (pad, brush)
Environmental Information
Proportion of easily degradable ingredients
92.5 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
contain no palm oil-based raw materials
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- S707-0010RA: 1 x 10 l canister
Classification according to CLP
Danger marking
Danger
Hazard information
- H290: May be corrosive to metals.
- H318: Causes serious eye damage.
Safety instructions
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
