Utilization
Soiling
-
Organic / inorganic contamination (grease, oil, protein, starch etc.) - Heavy stain load on textiles e.g. blood, starch, protein etc.
Material compatibility
- Textiles | Cotton
- Textiles | blended fabric
- Textiles | synthetic and microfibre
Product Information
- Improves washing performance and increases the cleaning performance of conventional detergents by binding the water hardness and effectively protecting against greying
- Optimised dirt-removing capacity due to special complexing agents
- Significantly prevents dissolved dirt from reaccumulating on the fibres
- Improvement of the dirt holding capacity
Area of application
- for the commercial sector
- for all washing temperatures
- for all water hardness ranges
- suitable for cotton, microfibre, viscose, polyester, polyamide, polypropylene
Application and dosage
- Washing temperatures from 30°C - 95°C.
- For automatic and manual dosing. The recommended dosage depends on the amount of dirt, the water hardness and the load.
-
5 - 20 Millilitre / Kilogramme Dry laundry
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Please observe the washing and care instructions of the textiles.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Environmental Information
Proportion of easily degradable ingredients
25 %
Phosphorus content
4 mg/g
Palm oil-based raw materials - RSPO-certified share
contain no palm oil-based raw materials
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- L831-0002VL: 1 x 2 l bottle
- L831-0200RA: 1 x 200 l drum
- L831-0020RA: 1 x 20 l canister
Classification according to CLP
Danger marking
Danger
Hazard information
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
Safety instructions
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
