Product Information
- Very good dispersive capacity
- Short drying times
- Enables seamless touch-up
- Suitable for coating repair
- Can be used as wiping care
- Suitable for cleaning
- Polishable with the high-speed machine
- Tested according to FMPA DIN 18032/2 for sports floors
- Slip-resistant according to DIN EN 16165
Area of application
- for use in public institutions, social educational institutions and administrations
- water-resistant floor coverings such as PVC, rubber, linoleum, sealed parquet and cork, concrete stone and natural stone
Application and dosage
- Always use cold water.
- Apply undiluted in 2 – 3 layers on a thoroughly cleaned, rinsed with clean water and dry floor covering.
- Floor covering must be free of surfactants.
- For absorbent floor coverings such as old linoleum coverings, pre-treatment with Corridor® Basic S 720 is recommended. When used with Corridor® Basic S 720, the appearance, durability and adhesion of Corridor® Complete S 732 to these coverings is significantly improved.
-
1:1 - with water
-
1:1 - with water
-
150 Millilitre / 10 liter Water
-
undiluted
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Protect from frost.
- Before processing, turn off heat sources (underfloor heating, heating, hot supply air).
- Avoid direct sunlight.
- The product must not be allowed to enter the sewage system, bodies of water or the soil. Product residues must be handed over to authorised disposal companies.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Tips and tricks
strong "streaking" under stress
Intensive cleaning with Corridor® PUR Clean S 766; spray cleaners with Corridor® Complete S 732 diluted 1:1
Dusting under stress
Allow the surface to dry completely before application; clean thoroughly again
insufficient filling power / shine
Coating too porous, use pore filler or apply another layer
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
Foam formation with "craters" as a result after drying
Coating too rough, spread more slowly when applying
Environmental Information
Proportion of easily degradable ingredients
19.2 %
Phosphorus content
1.1 mg/g
Palm oil-based raw materials - RSPO-certified share
100 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- S732-0001RA: 12 x 1 l bottle
- S732-0005RA: 1 x 5 l canister
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
