Utilization
Soiling
-
Care product residues (coatings, polymers etc.)
Material compatibility
- Concrete stone and terrazzo | non-calcareous
- PVC | homogeneous
- PVC sports / multi-purpose halls | coated
- PVC | heterogeneous, multilayer
- Design vinyl
- Synthetic resin filler coverings
- PVC composite decking
- Granite
- Gneiss
- PVC | PU seal
- Polyolefin
- Conductive floor coverings
- Quartzite
- Clinker and terracotta
Product Information
- Fast-acting problem solver
- Intensive film-removing action
- Suitable for use in cleaning machines
- Removes stubborn over-coating
- Very good wetting properties and reduced slip hazard
- Low-foaming
Area of application
- alkali and water-resistant hard floor coverings such as PVC, stone (unpolished), clinker and clay tiles
- Removal of high-speed compacted coatings
Application and dosage
- Always use cold water.
- Spread the solution on the floor and let it take effect for 10 – 15 minutes, thoroughly clean and soak up the loosened dirt.
- Rinse the floor covering with clean water.
-
1 - 2.5 liter / 10 liter Water
-
1 - 2.5 liter / 10 liter Water
- Apply fresh application solutions and consume them within 24 hours at the latest.
Note
- Not suitable for linoleum and rubber.
- Not suitable for alkali-sensitive floor coverings such as linoleum, rubber, open wood, cork, limestone such as marble and terrazzo.
- When used in the machine, the tanks should be cleaned and rinsed regularly.
- Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
- Commercial use only
Tips and tricks
still weak / poor dissolving effect of the coating
use higher mechanics e.g. Hi-Pro Pad; choose another basic cleaner e.g. Corridor® Power Stripper S 708, Total G 424
low / weak cleaning performance
Adjust product dosage
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
Environmental Information
Proportion of easily degradable ingredients
100 %
Phosphorus content
0 mg/g
Palm oil-based raw materials - RSPO-certified share
100 %
The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.
Sales units
- G426-0010RA: 1 x 10 l canister
Classification according to CLP
Danger marking
Danger
Hazard information
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- EUH208: Contains Limonene. May produce an allergic reaction.
Safety instructions
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER/doctor.
Download area
- Operating instructions
- Safety Data Sheets
- Technical Data Sheets
- Environmental Information
