Total
Floor

Total

G 424
Basic cleaner, highly alkaline

Utilization

Soiling

  • Care product residues (coatings, polymers etc.)

Material compatibility

  • Concrete stone and terrazzo | non-calcareous
  • PVC | homogeneous
  • PVC sports / multi-purpose halls | coated
  • PVC | heterogeneous, multilayer
  • Design vinyl
  • Synthetic resin filler coverings
  • PVC composite decking
  • Granite
  • Gneiss
  • PVC | PU seal
  • Polyolefin
  • Conductive floor coverings
  • Quartzite
  • Clinker and terracotta

Product Information

  • Very good film-removing action
  • Removes stubborn dirt
  • Low-foaming
  • Very good wetting properties

Area of application

  • alkali and water-resistant hard floor coverings such as PVC, stone (unpolished), clinker and clay tiles

Application and dosage

  • Always use cold water.
  • Spread cleaning solution on the floor, let it briefly take effect, clean thoroughly, vacuum the loosened dirt, remove residues.
  • Rinse the floor covering with clean water.
  • 1 - 2.5 liter / 10 liter Water

  • 1 - 2.5 liter / 10 liter Water

  • Apply fresh application solutions and consume them within 24 hours at the latest.

Note

  • Before application, check the surface for colour fastness in a hidden area.
  • Not suitable for alkali-sensitive floor coverings such as linoleum, rubber, open wood, cork, limestone such as marble and terrazzo.
  • When used in the machine, the tanks should be cleaned and rinsed regularly.
  • Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
  • Commercial use only

Tips and tricks

low / weak cleaning performance
Adjust product dosage
Surface damage (discoloration, swelling of material, etc.)
check chemical and water compatibility
still weak / poor dissolving effect of the coating
choose a fast-acting basic cleaner, e.g. Corridor® Power Stripper S 708, Total Extra G 426

Environmental Information

Proportion of easily degradable ingredients

100 %

Phosphorus content

0 mg/g

Palm oil-based raw materials - RSPO-certified share

contain no palm oil-based raw materials

The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.

Sales units

  • G424-0010RA: 1 x 10 l canister

Classification according to CLP

Danger marking

Danger

  • Ätzend, reizend
  • Reizend, Gesundheitsschädlich

Hazard information
  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.

Safety instructions
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P310: Immediately call a POISON CENTER/doctor.

Download area

  • Operating instructions
  • Safety Data Sheets
  • Technical Data Sheets
  • Environmental Information