Floor

Corridor^® Black

S 739

Black dispersion

Material compatibility

Cement and concrete screed
Wooden floor | sealed
Linoleum | uncoated
Linoleum | coated
PVC | homogeneous
Asphalt flooring

Product Information

Durable, black colouring polymer dispersion
Forms a resistant protective film
Very good filling power and good flow properties
High coverage for an excellent look
Free of metal salt
Slip-resistant according to DIN EN 16165
Sealing by final application matt, glossy, high-gloss possible

For water-resistant, absorbent and coatable (also with residual moisture) and thoroughly cleaned floor coverings such as stone, asphalt, cement and concrete screed, bitumen, linoleum
particularly suitable for industrial flooring for recoloring and care of heavily used floor surfaces, e.g. B. in exhibition halls and workshops

Apply a thin layer on thoroughly cleaned, neutralized and dry floor covering with a mop or a scrubber.
Let it dry thoroughly and repeat the process.
Perform the last application with a colourless coating, S 734, S 737, S 741.
For sealing, choose between Corridor® Glorin S 734 for glossy, Corridor® Matt S 737 for matte or Corridor® Jewel S 741 for high-gloss.

undiluted

Apply fresh application solutions and consume them within 24 hours at the latest.

Protect from frost.
Before processing, turn off heat sources (underfloor heating, heating, hot supply air).
The product must not be allowed to enter the sewage system, bodies of water or the soil. Product residues must be handed over to authorised disposal companies.
Changes or variations in colour of the product do not impact on the quality. The product image may differ in colour and shape from the original.
Commercial use only

Staining under foot

after Corridor® Black S 739 always apply a layer of Corridor® Glorin S 734, Corridor® Matt S 737 or Corridor® Jewel S 741

insufficient filling power / shine

Coating too porous, use pore filler or apply another layer

Surface damage (discoloration, swelling of material, etc.)

check chemical and water compatibility

grey / matt appearance of the surface due to hard water

clean periodically with O Tens Azid G 501

strong "streaking" under stress

Intensive cleaning, e.g. with Corridor® PUR Clean S 766, Maradin HC 43

Foam formation with "craters" as a result after drying

Coating too rough, spread more slowly when applying

Proportion of easily degradable ingredients

23.2 %

Phosphorus content

0.7 mg/g

Palm oil-based raw materials - RSPO-certified share

contain no palm oil-based raw materials

The proportion of easily degradable ingredients refers to the proportion of organic ingredients that are defined as “easily biodegradable” according to OECD 301 or Detergent Regulation (EC) No. 648/2004. The value of the phosphorus content refers to elemental phosphorus. Palm oil is an important renewable source for the production of raw materials. The Roundtable on Sustainable Palm Oil (RSPO), founded in 2004, promotes sustainable cultivation methods for palm oil. This results in a certification system and the possibility of declaring raw materials as “RSPO-certified”.